|
PA6S Hot Spot Powered Personal Monitor
The new design of the PA6S includes the convenient mic stand insert on the bottom of the unit. This allows a quick setup on top of a mic stand, with the PA6S angled upward for accurate vocal monitoring.
The included mic stand adaptor insures a more stable and secure placement on any mic stand.
Molded-in yoke bracket points. With the optional yoke bracket assembly the PA6S can be mounted to a wall or ceiling, or attached to a mic stand and angled in any direction.
Microphone boom mount on top of the PA6S eliminates the need for a second mic stand for your microphone. (Requires optional hardware).
Integrated handle into the top of the enclosure.
Built in Compressor/Limiter prevents output distortion.
-20dB pad switches on each XLR input allow high-level signals without distortion.
3 band EQ (High, Mid, Low) to adjust the sound to what you want to hear.
Pass through on each channel acts as a built in splitter to send signals to a mixer snake or another PA6S.
Two way speaker system: 6.5" neodymium high power woofer and 1.5" high efficiency Neolite tweeter allows for wider frequency response.
170 watt Class D amplifier.
Lighter weight: Innovative speaker and amplifier designs actually allowed us to reduce the weight of the PA6S from its predecessors, while improving the performance.
SPEAKER SECTION
Woofer: One Galaxy Audio SW6.5 ferro fluid cooled 6.5" NEOLITE Neodymium Woofer
Tweeter: One ST1.5 fluid cooled 1.5" NEOLITE Neodymium Titanium Dome Tweeter
Nominal impedance: 4 ohms
Power handling capacity: 155 watts
ENCLOSURE
Enclosure Materials: Fire retardant styrene
Color: Black
Dimensions: 7.75x11.75x6.75in
Net weight: 6.4 lbs
AMPLIFIER SECTION
Rated Power: 170 watts at 4 ohms, 180 watts Dymamic Power
Equalization: Three band center detent
Lo: +/- 12 dB peak/dip at 200 Hz
Mid: +/- 12 dB peak/dip at 2 kHz
Hi: +/- 12 dB shelving at 10 kHz
Sensitivity (1 Watt at 1 meter): 98 dB (1 kHz octave band)
Frequency response: 80 Hz�18 kHz
Maximum SPL at clip: 118 dB
Total Harmonic Distortion: <0.5% at 4 ohms
Input connections: Two 1/4in Balanced/Unbalanced Two XLR 24V Phantom PWR One 1/8in Stereo Line In
Output connections: Two XLR Thru Outputs One 1/4in Preamp Output
Indicator LEDs: POWER, CLIP & COMPRESSOR
Power Requirements; Domestic: 120 VAC 60Hz
Export: 230VAC 50Hz
Safeguards: Short circuit current limiting. Short circuit foldback limiting. Thermal short circuit protection
|
